Softub & SplashTub Grit-Gitter

It gets the grit while you sit!
If you notice grit after you're already sitting in your Softub spa, don't get our of the water to clean it up. The Grit-Gitter floats in your Softub and is always at hand. The Grit-Gitter is great for vacuuming the filter compartment and can also be used to collect things floating on top of the Softub water.

Directions

1. Fill the bulb with water by submerging the Grit-Gitter with the bulb end down. Squeeze the bulb one or two times to help remove the air.

2. Position & Squeeze. In one smooth, easy motion, squeeze the bulb, and releasing the bulb quickly, move the Grit-Gitter forward (3 to 6 inches) over the grit. A momentary delay before squeezing the bulb again works best.

3. Clean frequently, or when squeezing the bulb squirts grit and water out of the nozzle. To empty the debris, rotate the bulb counter-clockwise 15 degrees and pull the bulb/ring straight away from the body. Dump the contents outside the Softub. Fill the bulb with water and pour over the screen to rinse away debris. Be sure no debris remains in the connection area to prevent interference when you reassemble the bulb to the body. To reassemble, line up the red mark on the body and the red dot on the ring. Push the bulb into the body and rotate the bulb clockwise 15 degrees until the ring locks in place.